Surfaces Hardwood Floors para Canchas, Instalacion y venta - DIDSA Distribucion e Instalaciones Deportivas en Mexico

An OSB 1/2" plywood wooden bed in a straight line or along the room. (4'x6' sheets) An OSB 1/2" OSB wooden bed at a 45º from the first (4'x6' sheets) Canadian Hard Maple Wood 3/4" thick x 2 1/4" wide. Steam block with a 6 thousandths polyethylene film Smooth Action Shock Absorber with 3/8" lifted chutes 2 1/4 wide x 3" long. (32 shock absorbers x sheet) Concrete Base

1.1	There will be a steam based block placed with a high density polyethylene sheet 6 mm thick.
1.2	2 wooden 1.22 x 2.44 , y 1/2" inch thick OSB or Plywood sheets will be placed, with the first layer in a straight line and throughout the area, with the lower part having 3/8 spacing bearings, in order to have a floating shock absorbing system (32 bearings per sheet), the second layer of sheets will be placed 45º from the first.
1.3	There will be a 2 1/4" thick x 3/4" thick Canadian Hard Wood floor placed nailed to the wooden sheet with a 45º edge which will be of second, good or premier quality according to the company.
1.4	The surface will be taken apart with a 50, 80 and 100 grade file with a Hummel floor sander in order to level the surface.
1.5	After cleaning the area with mineral thinner, the surface will be polished with 100 and 120 grade carbon fiber mesh.
1.6	There will be a special polyurethane resin base special sealant applied for Maple.
1.7	All of the surface will be polished and cleaned with Mineral Thinner.
1.8	The tracing and painting of regulation lines will be performed.
1.9	Application of two coats of transparent polyurethane, which is shiny and has a good grip which is especially good for sport, giving it an excellent quality and finish.